Warning and Safety instructions
11
Correct application
Risk of burning due to hot components and steam.
The soleplate and the areas surrounding it on the iron and the
Steamer nozzles are very hot. Escaping steam can cause severe
burns.
Avoid direct contact with escaping steam, the soleplate and the
Steamer nozzles.
Never direct the soleplate and Steamer at other people, animals or
electrical appliances of any kind.
Do not use a pressure washer or hose pipe to clean the steam
ironing system.
Clean the steam ironing system only after it has cooled down.
Danger of injury by crushing and trapping. Do not reach between
moving parts when assembling, dismantling or adjusting the height
of the steam ironing system.
The steam ironing system must only be set up on a level surface
which has the appropriate load-bearing capacity. The steam ironing
system must only be used in a horizontal position. The iron must be
used and placed on a flat stable surface.
The steam ironing system must be assembled when ironing. How-
ever, the steamer can be used when the ironing board is in the up-
right position.
Ensure that the power cable does not present a trip hazard when
unwound.
Use caution when the appliance is heated. There is an acute risk
of burning if you come in contact with the soleplate of the iron or the
steamer jets. The warning symbol “Hot surface”() on the iron in-
dicates that it is hot.
To Next Page
Loading...
