Assembly
*INSTALLATION*
20
At the same time, pull the handle up-
wards with the other hand or press
the handle down.
Do not push down on the ironing
board while adjusting the height.
Always use the handle on the tower
to adjust the height.
When you have reached your desired
working height, release the rotary
control.
The rotary control will spring back into
the centre position. The ironing board
remains in this position by itself.
For additional stability, the ironing
board locks into place under extra
pressure with an audible click. Now
the working height you selected is
twice as secure.
Tip: Adjust your working position to ap-
proximately hip height for optimum
comfort.
To Next Page
Loading...
Need help?
General
