Miele PWM 906 User Manual

Initial commissioning
21
Removing the shipping struts
The display will remind you to remove
the shipping struts.
 Risk of damage due to failure to
remove the shipping struts.
Failure to remove the shipping struts
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the shipping struts as
described in “Installation and
connection”.
 Confirm that the shipping struts have
been removed with the OKsensor
control.
Continue commissioning as described in
operating instructionsappears in the
display.
 Confirm the message with the
OKsensor control.
Completing the commissioning
process
To complete the commissioning
process, the Normal 60°C program
must be run without laundry and
without detergent.
If the power is interrupted prior to the
start of the first wash program (e.g. if
the machine is switched off with the
sensor control), the initial
commissioning process can be
completed again.
Once a wash program has been
running for over 20minutes, the initial
commissioning process does not have
to be performed again.
 Open the shutoff valves.
 Touch the Programssensor control.
 11:02
Whites Minimum iron Express
Normal Delicates Woollens
Programs
 Touch the Colourssensor control.
 11:02
60 °C 1500

1:07
Normal
h
Overview
Temperature Spin speed
Extras
not selected
 Timer
CapDosing
rpm
not selected
 Touch the Start/Stopsensor control.
When the program has finished, your
machine is ready for use.
If you have activated disinfection
programs, you must complete the
Thermal disinfectionprogram as the
first program; make sure you use a
suitable detergent but do not load
the machine.

Miele PWM 906 Specifications

General

Brand	Miele
Model	PWM 906
Category	Washer
Language	English