Miele PWM 906 - Extra options; Selecting Extra options; Prewash; Pre-rinse

Extra options
47
You can add extra options to the wash
programs.
Not all the Extra options can be used
with every program. If an Extra option is
not listed, it is not permitted for use
with the wash program in question.
Selecting Extra options
 Touch the Extrassensor control.
 Select one or more of the Extra
options available.
 Confirm with the OKsensor control if
several Extra options are available.
Prewash
A prewash can be added for heavily
soiled laundry. Coarse soiling is
loosened and removed before the main
wash.
Pre-rinse
The laundry is rinsed before the main
wash to remove larger quantities of
soiling, e.g. dust, sand.
Rinse plus
An extra rinse can be activated to
achieve a better wash result.
Soak
For heavily soiled fabrics with protein
stains. The soak duration is 10minutes.
Intensive
For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency is
increased through more intense
mechanical action and the application
of more heat energy.
Water plus
The water level in the main wash and
the rinses will be increased.
SoftSteam
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the program. Reducing the
maximum load by 50% will achieve a
better result. Small loads give a better
result.
The textiles must be suitable for drying
in a tumble dryerand suitable for
ironing.
Rinse hold
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the program.
Starch stop
Water is drained out of the machine
before the last rinse and the program
stops. The prepared starch is added
directly to the drum. The program is
continued with the Start/Stopsensor
control.