Miele PWM 906 - Changing the program sequence; Changing the program; Cancelling a program; Adding or removing laundry

Changing the program sequence
49
A program cannot be cancelled or
changed when operating a payment
system.
Changing the program
After a program has started, it is no
longer possible to select a different
program.
You will need to cancel the current
program before you can select a new
one.
Cancelling a program
You can cancel a wash program at any
time after it has started.
 Touch the Start/Stopsensor control.
The following will appear in the display:
Cancel the program?
 Select yes.
The following will appear in the display:
Program cancelled.
The suds are pumped away.
 Wait until the door unlocks.
 Pull open the door.
 Remove the laundry.
Adding or removing laundry
You can add or remove items during the
first few minutes after the program has
started.
 11:02

Denim
Status
Time left
h0:37

Main wash
Add laundry
 Touch the Add laundrysensor control.
If the messageAdd laundry is not
visible in the display then it is no
longer possible to add items of
laundry.
The program will stop and the door will
unlock.
 Risk of chemical burns from
detergent.
When adding or removing laundry,
your skin may come into contact
with detergent, particularly if the
detergent is dispensed externally.
Take care when placing your hands
inside the drum.
If suds have come into contact with
the skin, rinse off immediately with
plenty of lukewarm water.
 Pull open the door.
 Add laundry or remove individual
items.
 Close the door.
 Touch the Start/Stopsensor control.