Miele PWM 906 - An error message appears in the display

Problem solving guide
57
An error message appears in the display
1
Problem Possible cause and solution
 Container empty
One of the external detergent containers is empty.
 Refill the detergent container.
 Hygiene info: run the
"Maintenance wash
hygiene" program, or
a program of at least
60°C
During the last wash, a wash program with a
temperature below 60°C or the Drain/Spinprogram
was selected.
 Start a program with a minimum temperature of
60°C (140°F) or the Maintenance wash
hygieneprogram.
 Check hot water
intake
The hot water supply is blocked or restricted.
 Check whether the hot water shutoff valve has
been turned on properly.
 Check whether the intake hose is kinked.
 Align the machine.
Laundry not properly
spun
The selected spin speed was not reached during the
final spin due to excessive imbalance.
 Check that the washing machine is level.
 Start the spin cycle again.
 Machine is leaking
The washing machine or drain valve is leaking.
 Close the shutoff valve.
 Contact Miele Service.
1
The messages will appear at the end of the program and when the washing
machine is switched on and needs to be confirmed with the OKsensor control.