Miele PWM 906 - Adding fabric softener or liquid starch separately; Adding starch separately; Dye removers and dyes

5. Adding detergent
27
Adding fabric softener or liquid
starch separately
 Select the Separate rinseprogram.
 Change the spin speed if necessary.
 Add the fabric softener or the liquid
starch to the compartment. Do not
exceed the maximum level mark.
 Touch the Start/Stopsensor control.
This will be automatically dispensed in
the final rinse. At the end of the
program, a small amount of water
remains in the compartment.
Adding starch separately
 Prepare the starch solution in
accordance with the manufacturer’s
instructions on the packaging.
 Select the Starchprogram.
 Add the prepared starch to the
compartment.
 Touch the Start/Stopsensor control.
Useful tip: If starching separately or
automatically, thoroughly clean the
detergent dispenser drawer, especially
the siphon, regularly.
Dye removers and dyes
 Damage due to colour run/dye
removers.
Colour run and dye removers can
cause corrosion in the washing
machine.
Do not use colour run or dye
removers in this washing machine.
Only use dyes suitable for use in a
washing machine. The manufacturer's
instructions on the packaging must be
observed.