Miele PWM 906 User Manual

Supervisor level
90
Select COM module
This washing machine is equipped
with an integrated WiFi module.
However, the washing machine can
also be equipped with an external
module.
– Off
– Internal module (factory default)
The internal WiFi module is used.
– External module
An XKM module or RS232 module is
inserted into the module slot.
WiFi
Control the networking of your
washing machine.
– Setup
This message only appears if the
washing machine has not yet been
connected to a WiFi network.
– Deactivate (visible when the network
is activated)
The network remains set up; the WiFi
function is switched off.
– Activate (visible if the network is
deactivated)
The WiFi function is reactivated.
– Connection status (visible when the
network is activated)
– The quality of WiFi reception
– The network name
– The IP address
– Set up again (visible if already set up)
Resets the WiFi login (network) to
immediately re-establish a new
connection.
– Reset (visible if already set up)
The network is no longer set up. A
new connection has to be
established in order to use the
network again.
– The WiFi is switched off
– The WiFi connection will be reset
to the factory default
Network sign-on
The date and time can be
synchronized over the network.
– Off
The date and time are not
synchronized over the network.
– As master
The machines are in a network but
are not connected to the Internet. A
machine is declared as the master
and sends data to the slave
appliances.
– As slave
The machines are in a network and
are connected to the Internet. All
machines are configured as slaves.
Data is synchronized over the
Internet.

Miele PWM 906 Specifications

General

Brand	Miele
Model	PWM 906
Category	Washer
Language	English