Installation and connection
82
Remove the lock catch from the
cover.
This lock catch cover is no longer
needed, however, please keep it in a
safe place.
Insert the lock catch into the new
cover supplied with the dryer.
Place this new cover to one side for
now.
4. Dismantle the door hinge from the
door
The door hinge cover must be un-
clipped from position and then re-
moved.
Use a screwdriver to press down
gently on position on the door
hinge cover.
Using a little force, pull out door
hinge cover .
This door hinge cover is no longer
needed, however, please keep it in a
safe place.
To Next Page
Loading...
Need help?
General
