Milesight EM400-MUD - Application Mode Settings (NB Version Only)

12
LinkCheckReq MAC packets to the network server every reporting interval to
validate connectivity; If there is no response, the device will re-join the
network.
Set the number of
packets sent
When rejoin mode is enabled, set the number of LinkCheckReq packets sent.
Note: the actual sending number is Set the number of packets sent + 1.
ADR Mode
Allow network server to adjust datarate of the device.
Tx Power
Transmit power of device.
Note:
1) Please contact sales for device EUI list if there are many units.
2) Please contact sales if you need random App keys before purchase.
3) Select OTAA mode if you use Milesight IoT cloud to manage devices.
4) Only OTAA mode supports rejoin mode.
4.3.2 Application Mode Settings (NB Version Only)
Go to Device > Setting > Application Mode Settings of ToolBox App to configure the application
mode and server information.
Parameters
Description
Application Mode
Select from Milesight IoT Cloud, AWS, TCP, UDP, and MQTT.
AWS
Server Address
Fill in the AWS server domain name which the data sends to.
CA File
Import the CA.crt file.
Client Certificate
Import the client certificate.