Milesight MS-C5341-X30PC - Page 117

111
Snapshot Type
Face Only, Upper Body, Whole Body are available.
Face Only: Capture the screenshot of face only.
Upper Body: Capture the screenshot of upper body.
Whole Body: Capture the screenshot of whole body.
If you check the "Background" option, it will take another screenshot of the entire
image.
Snapshot
Set the number of screenshot to 1~5. It will take screenshot based on the
snapshot interval you set.
Record Video Sections
Six different periods are available(5, 10, 15, 20, 25, 30 sec).
Save Into NAS
Save the alarm files into NAS.
Upload Via FTP
Upload the alarm files via FTP.
Upload Via Email
Upload the alarm files via Email.
Enable Face Detection
Message Post Settings
Check the checkbox to enable Face Detection Message Post.It will push
information to some third-party devices or software that are compatible with
ours. Information can be pushed by TCP or HTTP.
Post Type
Information can be pushed by TCP or HTTP.
HTTP Notification URL
There are three types of HTTP Notification URL, including URL1,URL2 and URL3.
Enable
Check the checkbox to enable a kind of HTTP Notification URL.
Trigger Interval
Trigger Interval of camera pushing information to some third-party devices.
HTTP Method
There are two HTTP push methods, including Post and Get.
Snapshot
Choose whether to push information with snapshot to some third-party devices
or software.
Note: This option is available just for URL1.
URL
Camera can use the API URL to send LPR information to back-end devices when
the detected face is captured. API URL format fills as below:
http://IP:Port/api/lpr?
Note: It supports HTTPS for HTTP Post.
User Name
Receiver name.
Password
Receiver Password.
Camera will detect faces in Live View according to the region and conditions you set. If you check
the "Show Tracks" option, it will display the face screenshot with the ID on the left side of Live
View.