Save Into Storage: Save alarm recording files into SD Card
Upload Via Email: Upload alarm recording files via email. This option is available
for Record Failed, SD Card Full, SD Card Uninitialized, SD Card Error and No SD
Card
External Output: If the camera equips with External Output, you can enable the
action after configuring the trigger duration
Play Audio: If the camera equips with Speaker, you can enable the action after
configuring the audio speaker
Play Buzzer: If the camera equips with Buzzer, you can check the checkbox to
enable the function
White LED: The White LED could flash as a warning signal when the alarm
triggered if the camera equipped with it(only for Mini PTZ Bullet)
Record Video Sections: Six different periods are available(5, 10, 15, 20, 25, 30
sec)
Snapshot: The number of snapshot, 1~5
Snapshot Interval: This cannot be edited unless you choose more than 1 to
Snapshot
Email Triggered Interval: Auto / 10 seconds / 20 seconds / 40 seconds / 60
seconds / 100 seconds / 5 minutes / 15 minutes / 30 minutes / 1 hour / 8 hours /
12 hours / 24 hours are available, this cannot be set unless when you choose
Record Failed, SD Card Full, SD Card Uninitialized, SD Card Error or No SD Card
and check the Upload via Email checkbox of related Alarm type
Trigger Duration: Length of time an alarm lasts, this cannot be edited unless
when you enable the External Output on the Alarm Action firstly
Audio Action Settings: Set the audio schedule to trigger different audio files and
action times in different time, which is corresponded to alarm action
Play Audio Interval: Auto/10 seconds/30 seconds/1 minute/5 minutes/10
minutes are available
White LED Flash Mode: Twinkle and Always are available.
White LED Flash Time: The duration of flash. Twinkle from 1 second to 10
seconds; Always from 1 second to 60 seconds
White LED Effective Mode: Always, Light Environment and Customize are
available. Always Mode allows to keep White LED always on. Light Environment
Mode allows to set the Effective Light Intensity to turn on White LED basing on
Current Light Intensity. Customize Mode allows to set the start time and the end
time to control White LED
4.6.2 VCA Event
Smart Event uses Milesight VCA (Video Content Analysis) technology, which provides advanced,
accurate smart video analysis for Milesight network cameras. Powered by AI chip,the new
generation video analytics is capable of recognizing vast attributes of human, vehicle, and object
pattern recognition models. As vehicle and human related events are very important in security
monitoring, the filtering is supported to better optimize the efficiency.
Note: There are AI and non-AI cameras in Milesight.
To Next Page
Loading...
