Milesight MS-C5341-X30PC - Page 42

36
Lamp.
Schedule mode: Select this option that you can customize the schedule to
enable/disable above modes
Reduce Motion Blur
Enable this function to reduce the motion blur of objects effectively.
You can adjust the deblur level from 1 to 100.
Defog Mode
Better image effect in foggy weather, refers to Figure 4-4-9
Note: Defog Mode is not supported for the -PA model in the AI series.
Digital Image Stabilisation
Decrease the blur and shakiness of the image.
Note: Digital Image Stabilisation is not supported for the -PA model in the AI
series.
Exposure Mode
Auto Mode, Manual Mode and Schedule Mode are available.
Auto Mode: The camera will adjust the brightness according to the light
environment automatically;
Manual Mode: The camera will adjust the brightness according to the value
you set, you can set the exposure time from 1~1/100000
s, t
he higher the value
is, the brighter the image is;
Schedule Mode: You can customize the schedule to enable/disable Auto Mode
and Manual Mode.
Single Mode
Set single mode for BLC/WDR/HLC.
Day/Night Mode
Support BLC/WDR/HLC on Day Enhancement Mode/Night Enhancement Mode
separately.
Schedule Mode
Set schedule mode for BLC/WDR/HLC.
BLC Region
Off, Customize, and Centre are available (in single mode, only enable when
WDR is disable)
Off: Calculate the full range of view and offer appropriate light compensation
Customize: This option enables you to customize inclusive or exclusive region
manually
Centre: This option will automatically add an inclusive region in the middle of
the window and give the necessary light compensation
Wide Dynamic Range
This function which can capture and display both bright and dark areas in the
same frame enables details of objects in both bright and dark areas to be
visible.
Off: Disable WDR function
On: Enable the WDR, there are Low/High/Auto three levels
Customize: Customize the schedule to enable/disable the WDR function and
set the levels with Low/High/Auto
Wide Dynamic Level
Set WDR with Low/High/Auto level
Anti-flicker Level
Reduce flickers that appear on screen in some lighting conditions and there are
10 levels of anti-flicker adjustments
High Light Compensation
This function is only for H.265 series to adjust the brightness to a normal range
when the light is strong, refers to Figure 4-4-10
Off: Disable HLC function