Milesight MS-C5341-X30PC - Page 80

74
Table 4-6-1 Description of the buttons
Parameters
Function Introduction
Enable Motion
Detection
Check the checkbox to enable Motion Detection function.
Sensitivity
Sensitivity level, 1~10
Onvif Motion
ActiveCells Settings
Normal and Compatible are available for the option. If the setting of motion
region of the third-party software is different from ours, please set this option to
Compatible.
Select All
Click the button, and the motion in the area will be detected.
Clear All
Click the button, and the area drawn before will be removed.
Step3: Set motion detection schedule;