Advanced Motion Detection Interface (for non-AI cameras)
Advanced Motion Detection Interface (for AI cameras)
Step1: Enable region exiting detection and set detecting sensitivity;
Step2: Set Ignore Short-Lived Motion time. If you set the time, when the moving duration of an
object is within the setting time, it will not trigger alarm;
Step2: Choose detection object. Check Human or Vehicle attribute, and the camera will alarm once
detecting people or vehicle and triggering related events;
Note: All AI Cameras support this function.
Step4: Set advanced motion detection region. If you choose Normal Mode, it supports configuring
the detection region for the current area. If you choose Advanced Mode (Only for PTZ series), it
supports configuring the detection region for different PTZ presets (Only support Preset 1~4 so
To Next Page
Loading...
