Millenium Mechatronics MI104 - Check Weighing; Enter to Menu; Set limits; Set check weighing mode

MI104 Weighing Indicator User Manual
- 10 -
5.5. Check Weighing
It can set an upper or lower limit when weighing with the limits range.
The unit will indicate whether a display value(weight) is within upper or lower
limits with an alarm sound . For details see the parameter F3 oFF.
 Check mode 1: No beep sound when within the limits. Function turned
off.
 Check mode 2: When the weight is between the limits. OK will shown and
beeper will be sound.
 Check mode 3: When the weight is out of the limits, the beeper will
sound and OK will shown.
5.6. Enter to Menu
In the weighing mode, press and together.
Display will be appear
5.7. Set limits
Press to enter the function.
Press key to select the limit.
Display will appear or
Press key to enter, press key to move active digits.
Press to change the value. After enter the value press to sure.
Press to escape.
5.8. Set check weighing mode.
Set hi
F0 H-L
Set Lo