Need help?Do you have a question about the Millenium Mechatronics MI104 and is the answer not in the manual?
General| Power Supply | 2 x AAA batteries |
|---|---|
| Material | Stainless steel |
| Auto Power Off | Yes |
| Display | LCD |
| Units | g, oz |
Instructions for unpacking the weighing indicator and checking included components.
Guidance on connecting load cells, adaptor, and power socket.
Details on connecting load cell cables to the indicator's 5-pin connector.
Instructions for charging the indicator's battery using the provided adaptor.
An overview of the MI104 indicator's physical layout and components.
Explanation of the symbols and segments shown on the indicator's LCD display.
Description of each key on the indicator and its corresponding function.
Procedure for turning the weighing indicator on and off using the ON/OFF key.
How to reset the indicator's display to zero at any time.
Instructions for taring containers and managing gross/net weight displays.
Steps for placing goods, waiting for stability, reading the display, and avoiding overload.
Setting upper/lower limits and understanding alarm sounds for check weighing.
Procedure to access the indicator's menu system by pressing specific keys.
Detailed steps for setting upper (Set hi) and lower (Set Lo) limits for weighing.
Configuring different modes for check weighing operations, including beeper behavior.
Manual accumulation of weights, saving and printing results, and recalling/deleting memory.
How weighing values are automatically added to memory without manual key presses.
Using the indicator for moving loads and locking readings when stable.
Operating peak hold function to store and update the highest reading reached.
Instructions on how to navigate and operate the parameter menu.
Details of menu options, sub-menus, and their descriptions within the parameter settings.
Step-by-step guide to perform calibration, including entering password and selecting functions.
Detailed procedure for normal calibration, including setting weights and confirming stability.
Procedure for linear calibration using three precise weights to correct linearity errors.
Technical specifications for RS-232 output, including code, data bits, parity, and baud rate.
Description of the data format and protocol used for continuous RS-232 output.
Examples of different print out formats available for data output.
Exploded view diagram and list of all parts for the MI104 indicator.
To Next Page