MI104 Weighing Indicator User Manual
Wait few seconds for display stable. Then press . The value will be
saved.
Followed by the total number of weight will be displayed
It can continue the process until the maximum capacity or value.
Note: When you change the weighing unit this saved values will be clear.
Accumulated Total
Manually, the scale can be set to accumulation by pressing , when an
optional printer is connected. See details in F4 Prt.
Memory Recall
When display shows Zero, you can see the number of weighing and total
weight by pressing , display will be shown for two seconds.
Delete the Memory
When display of Zero, you can see the number of weighing and total
weight by pressing , display will be shown for two seconds. Press
during this display. The memory data are deleted and display will
be shown
5.10. Accumulation Automatically
In this function the individual weighing values are automatically added
into the memory. There is no need to press any keys.
For this function, set to parameter F4 Prt and select P AutO.
After select this function, display indicator AUTO will be shown.
Place the goods on the platform to be weighed
After the display is stable, the beep will sound twice.
To Next Page
Loading...