MI104 Weighing Indicator User Manual
5. OPERATION
Initial Start – Up:
Warm-up time of 15 minutes stabilizes the measured values after switching on.
5.1. Power ON/OFF:
Switch on the balance by pressing key.
The display is switched on after the self test(countdown). To switch off,
press again the key.
5.2. Zero
You can set the display to zero any time by pressing key.
5.3 . Tare
The weight of any container can be tared by pressing button so that
with subsequent weighing , the net weight of the object being weighed is
displayed.
Load weight on the platform.
Press key. Zero is displayed, and tare is subtracted.
Remove weight on the platform. Tared weight is displayed. It can set only
one tare value. It can display with a minus value.
Press G/N to change between gross weight and net weight.
To clear the tare value, remove the load and press key. Zero is
displayed, tare weight is cleared.
5.4. Weighing
Place goods to be weighed on the platform.
Wait few seconds for “STABLE” to appear on display.
Read the display.
Avoid overloading. When display appears “ol” reduce the load or
unload.
To Next Page
Loading...