Millenium Mechatronics MI104 - PARAMETER BLOCK

MI104 Weighing Indicator User Manual
- 14 -
Select the menu
 Press , it can change the menu block one by one.
 Using increase the digit.
Enter the selected menu
 Press , it can confirm, which will be shown displayed.
Change the digit
 Press , it can change the active digit.
Return to weighing mode
 Press , exit from the menu.

PARAMETER BLOCK
Menu
Sub-Menu
Description
F0 H-L
Weighing with
set limits
SET Lo
Lower limit value
SET Hi
Upper limit value.
F1 toL
to CLr
Clear the accumulation memory with out
printout
to P-C
Print the total accumulation memory and clear
the total memory
to Prt
Print the total accumulation and keep all the
memory.
F2 Unt
G
Weighing units
Lb
Oz
Tj
th