MI104 Weighing Indicator User Manual
Unload the goods, the weighing value will be saved automatically and will
be follow beep sound once.
It can continue the process until the maximum capacity or value.
5.11. Animal Weighing
MI104 can use for moving (fluctuating) loads.
For this function, set to parameter P4 CHk to ModE 2
After select this function, display indicator ANIMAL will be shown.
Bring the load / animal on to the platform.
When the display gets stable for few seconds , the reading will be locked
followed by a beep.
5.12. Peak Hold
MI104 can operate peak hold function, peak reading will be stored and will
update automatically when a newer peak is reached.
For this function, select parameter P4 CHk to ModE 4
In the normal weighing mode press and keys together to turn
on or turn off Peak hold operations.
To cancel the peak reading from Hold, press Zero key for 2 seconds.
6. PARAMETERS
KEYS OPERATIONS INTO THE MENU
Enter the menu
In weighing mode, press key and key together.
To Next Page
Loading...