Maintenance
21
IPAK Meta
and IPAK Quanta replacement
1. Select Install consumables app and click on Install IPAK
Meta & Quanta.
2. Follow the self-guided wizard.
IPAK Meta & IPAK Quanta both need to be replaced at the same
time.
This is because they have been designed to achieve the expected
best-in-class Milli-Q ultra-pure water with the unique combination
of the proven Jetpore
®
ion-exchange resin and the innovative
IQnano
™
resin. Only together, and when integrated into the
hydraulic design of the system, they can purify water to remove
contaminants down to their traces from a pre-treated source.
IPAK Meta & Quanta
consumable kit: IPAKKITA1
IPAK MetaIPAK MetaIPAK MetaIPAK MetaIPAK Meta
IPAK QuantaIPAK QuantaIPAK QuantaIPAK QuantaIPAK Quanta
Note: If the Milli-Q feed is from a storage tank, before starting, ensure there is at least 30L
of water present. If there is not enough water present, the wizard will nish but the cartridges
may not be fully rinsed. The remaining rinse will need to be performed manually.
Important! During the physical pack replacement in the water purication unit, both
cartridges must rst be removed before installing the new set.
Remove BOTH old cartridges Then insert new cartridges
Note 1: When properly installed, the blue side should face you with the e-Sure symbol
behind.
Note 2: If the sound has been activated, it is normal to hear a buzzer when changing the
consumables. This is temporary and is only present when the IPAK or POD-Paks are removed.
As soon as they are put back into place, the buzzer will stop.
Application POD-Pak installation
1. Select Install consumables app and click
on Install application POD-Pak.
2. Select the POD-Pak to be installed, click on
the Next button and follow the self-guided
wizard.
Do not over tighten the twist & lock action
when installing a new POD-Pak.
3. Rinsing must be performed manually to
complete the installation as indicated on the
screen. When completed press “Finish” to
exit the wizard.
Note: All certicates of quality are now available online.
Visit www.mymilliqconsumables.com