Milltronics ML Series User Manual

15
Chapter 2 - Specification
Machine Weights
TL14 ML16 ML18 ML22 ML26 ML35 ML40
Lbs. 4000 6000 7500 9000 9500 23,500 24,500
Kg 1800 2730 3400 4100 4300 10,500 11,000
Weights listed above are for standard bed length only. Consult specifications at
the back of this manual for optional bed lengths.
Current/Voltage requirements
TL14 ML16/18 ML22/26 ML35/40
208-240 VAC 40 Amps 50 Amps 75 Amps
125 Amps
Transformer 11 KVA 11 KVA 20 KVA 48 KVA
Coolant Capacities
TL14 ML16 ML18 ML22/26 ML35/40
Gallons 25 20 26 50 90
Liters 90 75 100 190 340
Coolant capacities listed above are for standard bed length only. Consult
specifications at the back of this manual for optional bed lengths.
Coolant Recommendation
Consult with a reputable coolant supplier in your area. You should use non-toxic, non-
corrosive, and non-flammable coolant. Avoid chlorine and sulfur, which may harm the
paint finish.
Use Mobil DTE24 or Equivalent
Hydraulic Fluid Tank Capacity (if equipped)
Option only
Gallons 10.5
Liters 40
Control Instructions, Schematics, Complete Specification Sheets
• Detailed instructions for programming the machine and operating it from the front
panel are given in the CNC operation manual provided separately.

Milltronics ML Series Specifications

General

Brand	Milltronics
Model	ML Series
Category	Lathe
Language	English