PROGRAMMER KEYPAD
All entries are made via the programmer keypad.
Run Mode
Press the associated key to view.
H TOT • high total; P-2 = 4 or 5 (P-55)
• PT 1; press to view level at DLD
transducer #1 P-2 = 3
L TOT • low total; P-2 = 4 or 5 (P-54)
• PT 2; press to view level at DLD
transducer #2, P-2 = 3
HEAD head reading, P-2 = 5
FLOW flow rate, P-2 = 5
mA mA output
TEMP temperature (P-65)
RATE rate of level change (P-70)
CONF echo confidence (P-80)
HRS 1 pump 1 service hours (P-24)
HRS 2 pump 2 service hours (P-25)
HRS 3 pump 3 service hours (P-26)
HRS 4 pump 4 service hours (P-27)
HRS 5 pump 5 service hours (P-28)
READ reading (P-76)
RUN initiates access into
CAL program mode
DIST press to view distance (P-78)
PL-443 4 – 2
To Next Page
Loading...
Need help?
General
