64
Pellerin Milnor Corporation
NOTE: The Milnor serial memory storage device (also known as a download box) con-
tains nonvolatile memory to hold a back-up copy of the programming and configuration
data for one machine. This data is transferred between the machine and the memory stor-
age device via the DIN receptacle on the machine. Two models are currently available:
KXMIC00507 and KXMIC00508. The already wired cable and DIN connector are in-
cluded as part of the memory storage device. Consult the Milnor Service department to
determine the correct device for a particular application.
5.3.1 Pin Identification
BNCUUP02.C02 0000196983 A.5 A.9 1/2/20 1:30 PM Released
Figure 14: 9-Pin DIN Connector Pin Identification (from wire entry side of connectors), page 64
illustrates the DIN receptacle (which uses male pins) and the mating plug (which uses female pin
sockets), each viewed from the wire entry side. The receptacle is normally installed and wired at
the Milnor factory. The plug and female pin sockets for customer use are provided in a bag inside
the electric box. Table 12: External Serial Link Pin Assignments, page 64 shows the function of
each pin.
Figure 14. 9-Pin DIN Connector Pin Identification (from wire entry side of connectors)
Receptacle (uses male pins)
Plug (uses female pin sockets)
Legend
A...Pin numbers molded into parts
B...Heavy white lines terminated with dots indicate pins normally connected together at the Milnor factory
Table 12. External Serial Link Pin Assignments
Pin
Number Function
Receptacle Wiring (inside electri-
cal enclosure)
Wire Number Color Code
1
Serial low DLL Blue and black
2
3
Serial high
DLH Blue and red
4
Supplemental Information
To Next Page
Loading...
