USE AND MAINTENANCE MANUAL
If selected, the machine performs multiple dosages for
each row.
Multi-step product length
Distance between the first dosage and the last in multi-
step products. Available only if the multi-step product is
enabled.
Number of dosages per
product
Number of dosages performed for each multi-step
product.
Available only if the multi-step product is enabled.
Number of dosages for
crown type product
Number of dosages carried out over the circumference
of the crown type product.
Shape of the drop type
product
If selected, the dosage starts at the maximum speed
and then decreases during the advancement until the
minimum speed is reached at the end of the set product
length.
If selected, the dosage starts at the minimum speed and
then increases during the advancement until reaching
the maximum speed at the end of the set product
length.
If selected, the dosage starts at the maximum speed
and then decreases during the advancement, reaching
the minimum speed at half of the product length. Then
start increasing until the maximum speed is reached at
the end of the set product length.
If selected, the dosage starts at the minimum speed and
then increases during the advancement reaching the
maximum speed at half of the product length. Then start
decreasing until the minimum speed is reached at the
end of the set product length.
Dosing rollers rotation speed used in the dosing phase
with less spillage of dough in drop type products.
Increase table distance
(only Zeppola product)
Increase the distance between the nozzles and the tray
before the second dosage. Adjust the height of the
product.
Advance of the stop of the
nozzles’ rotation
(only Zeppola product)
Advance time of the stop of the nozzles’ rotation during
the dosing phase.
To Next Page
Loading...