MIMAC MAXIDROP TWIST - 6.8. PROGRAM BACKUP;RESTORE; 6.8.1 BACKUP; 6.8.2 RESTORE

USE AND MAINTENANCE MANUAL
39
Parameter
Icon
Description
Dosage height of each
single layer in long
multilayer products
Distance between the nozzles and the tray when dosing
the first layer.
Distance between the nozzles and the product when
dosing the second layer.
Distance between the nozzles and the product when
dosing the third layer.
Flame product height
Total height of the flame type product.
Table lowering speed
during dosing
Lowering speed of the table during the dosing phase.
6.5. COPYING A PROGRAM
To duplicate a program, select the program to duplicate. Press then the key.
The program will make a copy of the original program in a new position of the programs’ list adding “_1” at the end of
the original program’s name.
6.6. MODIFYING PARAMETERS DURING OPERATION
During the working cycle it is possible to modify all the parameters remaining enabled. The parameters that cannot
be modified are displayed with a grey background as indicated under paragraph 6.4