EasyManuals Logo

MIMAKI CJV330 Series Requests For Care And Maintenance

MIMAKI CJV330 Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
2. Maintenance Methods
10
3
Open the maintenance cover on the left side.
4
Clean around the print head.
Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe
off the maintenance liquid. Make sure none remains.
Never touch the
nozzle surface!
Clean the print head sides using a cleaning stick.
Clean using a cleaning stick or soft cloth.
Never touch the print head nozzle surface.
5
Once cleaning is complete, close the cover, then press the [ENTER] key.
Cloth Wiper Area Cleaning
Continuing to use while dirty will cause dried ink and attached dust to rub against the head nozzle surface,
and lead to ejection failures (e.g., nozzle clogging or deflection).
Be careful to avoid leaving fragments from the cleaning stick behind when cleaning. These
fragments will increase the risk of ejection failures (e.g., nozzle clogging or deflection).
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
The Maintenance menu is displayed.
2
Select [Station Maint.] > [Carriage Out] > [Move To Platen Right End], then press the [ENTER]
key.
The carriage moves over the platen.
3
Open the maintenance cover on the right side.

Other manuals for MIMAKI CJV330 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MIMAKI CJV330 Series and is the answer not in the manual?

MIMAKI CJV330 Series Specifications

General IconGeneral
BrandMIMAKI
ModelCJV330 Series
CategoryPrinter
LanguageEnglish

Related product manuals