MIMAKI CJV330 Series Requests For Care And Maintenance

2. Maintenance Methods
16
Jam Sensor Detecting Plate Cleaning
Continuing to use the dirty carriage underside will rub dried ink and attached dust on to the media, resulting
in contaminated prints.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station Maint.] > [Carriage Out] > [Move To Maint. Space], then press the [ENTER] key.
• The carriage moves to the maintenance space.
3
Open the maintenance cover on the left side.
4
Clean the jam sensor detecting plate.
• Clean the jam sensor detecting plate underside at the left and right sides of the carriage.
• Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe
off the maintenance liquid. Make sure none remains.
5
Once cleaning is complete, close the cover, then press the [ENTER] key.

MIMAKI CJV330 Series Specifications

General

Brand	MIMAKI
Model	CJV330 Series
Category	Printer
Language	English