MIMAKI CJV330 Series Requests For Care And Maintenance

2. Maintenance Methods
12
• Insert the cleaning stick as far as the line shown in the illustration.
5
Once cleaning is complete, close the cover, then press the [ENTER] key.
DAS (Automatic Correction Function) Sensor Cleaning
The DAS sensor is located on the carriage underside. If dust or debris accumulates on the sensor, DAS ()
may not function.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station Maint.] > [Carriage Out] > [Move To Maint. Space], then press the [ENTER] key.
• The carriage moves to the maintenance space.
3
Open the maintenance cover on the left side.
4
Clean the DAS sensor.
• Wipe clean using cotton swabs or a soft cloth.
• For heavy soiling, wipe using a soft cloth soaked in diluted neutral detergent and
thoroughly wrung out.
5
Once cleaning is complete, close the cover, then press the [ENTER] key.

MIMAKI CJV330 Series Specifications

General

Brand	MIMAKI
Model	CJV330 Series
Category	Printer
Language	English