MIMAKI JFX 200-2513 - b. Setting Matte Print

- 15 -
b. Setting Matte Print
1.
In the job list, select the clear ink job.
• Click the “Properties” icon.
• Click the [Setup] button in the [Job attribute] field.
2.
Select the [UV Mode] tab.
• Make the settings as follows.
(1) Select “Matte Print” in the mode list on the left
side.
(2) Set “100%” for [Illumination].
Set “0” for [Additional UV irradiation].
(3) Click the [OK] button.
(1)
(2)
(3)