MIMAKI JFX 200-2513 - B. Printing the clear ink onto the valid pixels of the color image

- 8 -
B. Printing the clear ink onto the valid pixels of the color image
To print the clear ink onto the valid pixels of the color image, create a special plate on the basis of the
image.
1.
In the Job List, select the job that will be the basis for the plate.
• Click the “Special plate” function icon.
2.
Make the settings as follows.
• Clear ×2 slot
(1) [Ink]: Select “Clear”
(2) [Ink volume]: Select “100%”.
(3) [Created area]: Select “Valid Pixel”.
(4) [Composite automatically]: Check the box, and
select “Top”.
(5) Click the [Create] button.
• Clear ×1 slot
(1) [Ink]: Select “Clear”
(2) [Ink volume]: Select “100%”.
(3) [Created area]: Select “Valid Pixel”.
(4) [Composite automatically]: Check the box, and
select “Top”.
(5) Click the [Create] button.
3.
The clear ink job will be created, in a
composited state.
• There are 2 slots for clear ink. Set
100% for each slot.
(2)
(1)
(5)
(3)
(4)
(2)
(3)
(4)
(5)
(1)