MIMAKI JFX 200-2513 - Effects and printing with clear ink; Clear inks effects; Ways clear ink can be printed

- 4 -
Effects and printing with clear ink
Clear ink’s effects
The effects below can be obtained by using clear ink.
These effects can be obtained via the “UV MODE” settings in RasterLink6.
Ways clear ink can be printed
Clear ink can be printed in the ways below with RasterLink6.
For printing the clear ink over the whole of a color image, and for printing it onto valid pixels of a color image, cre-
ate a clear ink job using the “Special plate” function of RasterLink.
For printing the clear ink as a special clear ink image, you must create the special clear ink image by means of
design software such as Illustrator.
Gloss feel effect - “Glossy Print” Matte feel effect - “Matte Print” 3D feel effect - “Emboss Print”
Printed over the whole of a
color image
Printed onto valid pixels of a color
image
Printed as a special image for
clear ink use