- 20 -
3.
Choose the job of clear ink from the job
list that is not selected in step 2.
• Refer to “a. Setting Glossy Print”and set the
glossy print.
4.
Choose the color job and clear ink of step2+3 from the job list,
• Press [Composite] from function icon.
5.
Check the following.
(1) From the top order of the list
Clear(Glossy) -> Clear(Emboss) ->Color
Check the order
• If the order is not as above, please replace the
composition List by Drag & Drop.
(2) Press [Composite] button.
6.
Synthesized.
7.
Execute printing.
• Depending on the job settings (clear ink texture, color image or not, etc), when a particular job
is printed a dialog box for specifying changeover of the UV lamp position (P. 16) may be dis-
played.
If quality is emphasized, you are recommended to display this dialog box. However, once this
box is displayed, printing will be halted until the box is manually closed. To print all jobs contin-
uously, click ON for [Do not show this message again while printing this job] when the box is
displayed at the time of print execution.
To Next Page
Loading...
