MIMAKI JFX500-2131 - About Installing This Machine

- 16 -
8.
Select the job created in step
7 from the job list.
• Click the “Properties” icon.
• Click the [Setup] button in the [Job
Attribute] field.
9.
Select the [Special Color]
tab.
• Make the settings as follows.
(1) [Ink]: “Clear”
(2) [Clear]：“40%”
10.
Select the [UV Mode] tab.
• Make the settings as follows.
(1) Select “Matte Print” in the mode
list on the left side.
(2) Illuminance: 100%
Additional UV irradiation: 0 time
(3) Click the [OK] button.
(1)
(2)
(3)
(1)
(2)