MIMAKI JV5 Series Maintenance Manual

© 2009 MIMAKI ENGINEERING CO.,LTD.
4.2.10 P.4
4.2.10 LANDING
1
2
3
4
5
6
7
8
 Cutter landing adjustment procedure
1. Select [$PEN LANDING].
The LCD indicates the present pen landing value and the pen
moves up and down repeatedly.
[
CLEANING/FEED ]: Selects
2. Select [CUT LANDING].
The LCD indicates the present cut landing value and the pen
moves up and down repeatedly.
[
CLEANING/FEED ]: Selects
3. Register the input value.
[ENTER]: Registers
#LANDING / CUT
DOWN LANDING =25
Basically, the value of pen landing and cut landing can
be the same.
An adjusted value of pen landing is automatically
reflected in a cut landing value in the CJV series.
If a value of cut landing is modified independently,
such a modification is not reflected in the value of pen
landing.
R.1.1
Maintenance Manual > Adjustment Items > Adjustment Function > LANDING
Model CJV30/TPC Issued 2008.08.04 Revised 2008.09.17 F/W ver. 1.20 Remark
1.1
Rev.

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English