MIMAKI JV5 Series Maintenance Manual

© 2009 MIMAKI ENGINEERING CO.,LTD.
8.5.3 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Operation Flow > Service Mode > #PARAMETER
Model CJV30/TPC Issued 2008.08.04 Revised F/W ver. 1.00 Remark
1.0
Rev.
8.5.3 #PARAMETER
SYSTEM PARAMETER
000:COMP. X = 0
----> 0
000:COMP. X = 0
#PARAMETER
SYSTEM PARAM. <ent>
FUNCTION
#PARAMETER <ENT>
[]/[]: Modifies the compensation value.
[ENTER]: Finalizes (To the next compensation screen)
[ENTER] / [END]
ALL PARAMETER
INITIALIZE ? :ent
[] / []
INITIAL=1
Initializing
all parameters
CLOSED PARAMETER
INITIALIZE ? :ent
INITIAL=3
Initializing the
non-disclosed parameters
SYSTEM PARAMETER
INITIALIZE ? :ent
INITIAL=2
Initializing the system
parameters
MAINTENANCEparameter
000:DIR = 0
----> 1
000:DIR = 0
#PARAMETER
MAINTE PARAM. <ent>
MAINTENANCEparameter
INITIALIZE ? :ent
[] / []
CUSTOMIZE PARAMETER
000:EDGE LV = 50
----> 100
000:EDGE LV = 50
#PARAMETER
CUSTOM PARAM. <ent>
CUSTOMIZE PARAMETER
INITIALIZE ? :ent
[] / []
RUNNING PARAMETER
000:CAPC.H1 = 0
----> 3000
000:CAPC.H1 = 0
#PARAMETER
RUNNING PARAM. <ent>
RUNNING PARAMETER
INITIALIZE ? :ent
[] / []
EXCHANGE PARAMETER
000:Hd.nn01 = 0
----> 3
000:Hd.nn01 = 0
#PARAMETER
EXCHANGE PARAM.<ent>
[] / []
INK-SYSTEM PARAMETER
000:LEVELsw = 0
----> 1
000:LEVELsw = 0
#PARAMETER
INKSYSTEM PARAM<ent>
INK-SYSTEM PARAMETER
INITIALIZE ? :ent

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English