Minarik AC200 SERIES User Manual

17
2. Press ENTER. The display will flash SELECT DATA FILE, and then show the last data
file that was selected. A blinking cursor will appear on the right side of the display.
If the data file that appears is the desired one, go to Step 3.
3. Once the desired data file is found, press ENTER to access the items that can be changed
within the file. A blinking cursor will appear on the left side of the display. the first item
that can be changed is the data file name.
To skip the procedure for changing the data file name, go to Step 7.
4. Press ENTER. A solid cursor will appear under the first character of the file name. The
file name can be up to 8 characters long.
Use the V and W keys to scroll through the data files.

Minarik AC200 SERIES Specifications

General

Brand	Minarik
Model	AC200 SERIES
Category	Controller
Language	English