Minarik AC200 SERIES User Manual

18
5. Use the V and W keys to change the character in a space, and use the ENTER key to move
the cursor from space to space (left to right only).
6. Once the cursor is under the last character space (and the desired file name is on the
display), press ENTER. This will store the new file name, and return the display to the item
menu.
NOTE: File names cannot be duplicated. If a file stored in the EPM Programmer already
exists with the same name, the display will flash NAME EXISTS!!!, and a different name must
be selected.
7. Press the V key to scroll to the next menu item: KEYPAD SPEED. This sets the initial
keypad speed command when the drive parameters are reset to OEM Defaults. If the drive
parameters are reset to factory defaults, the initial keypad speed is always 20.0 Hz. Refer to
Parameter 48 in the AC100 or AC200 Series Installation and Operation manual for more
information on resetting the drive parameters.
To skip this procedure, go to Step 10.

Minarik AC200 SERIES Specifications

General

Brand	Minarik
Model	AC200 SERIES
Category	Controller
Language	English