Check digit verification: The check digit is made as the sum module 103 of all data digits.
Check digit transmission: By setting Enable, check digit will be transmitted.
Max./Min. code length: Refer to Max./Min. code length of
3-15 Code 39 (Code 32, Trioptic Code 39)
.
Code ID setting: Refer to Code ID setting of
3-10 UPC-A
.
Insertion group selection: Refer to Insertion group selection of
3-10 UPC-A
.
Truncate leading zeros: The leading “0” digits of Code 128 barcode characters can be truncated when
the feature is enabled.
To Next Page
Loading...
