Mindeo MP8600 - LED and Beeper Indication

23
3-7 LED and Beeper Indication
Power on alert: After power-on the image platform will generate an alert signal to indicate a successful
self-test.
LED indication: After each successful reading, the LED above the image platform will light up to indicate
a good barcode reading.
Beeper indication: After each successful reading, the image platform will beep to indicate a good
barcode reading, and its beep tone duration is adjustable.
Beep tone duration: This parameter can be adjusted for a good reading upon favorite usage.
Volume of beeper: This parameter can be adjusted for different level of the volume of the beeper. This
parameter can also be adjusted by pushing Beeper push button.
Beep tone: This parameter can be adjusted for a favorite ring tone. This parameter can also be adjusted
by pushing Beeper push button.