25
3-8 LED illumination level
Decode illumination mode: Enable illumination causes the embedded scanner to turn on the illumination
to aid decoding. Disable illumination to turn off illumination for the embedded scanner during decoding.
Better quality images could be obtained with illumination support. The effectiveness of the illumination
decreases as the distance to the target increases.
Level of decode illumination: This parameter can be adjusted for different level of decode illumination.
Illumination mode of Auto-detection:
Always off- Illumination LED will be always turned off.
Enable illumination in low light conditions- In low light conditions, the scanner will turn on illumination
LED automatically to ensure normal work. While in other light conditions, the illumination LED will be
turned off automatically.
Always on- Illumination LED will be always turned on (Default).
Note: This function is only valid in Auto-detection mode.
To Next Page
Loading...
