The best way to know exactly what pressures to run is by having your vehicle professionally weighed. There are
many excellent resources on the web that can provide a wealth of information. One such site is
www.RVSafety.com.
Where to Enter Baseline Pressures:
The TireMinder® TM-A1A™ allows you to temporarily disconnect the front or back half of the display. This feature
will only be important to you if:
A) You are monitoring tires on a Motor Home AND the tires on a towed vehicle, dolly or trailer.
B) You are monitoring tires on a truck or SUV AND tires on a 5th wheel or trailer.
If the above (A or B) applies to you, it is important to program the baseline pressures in the correct positions on
the monitor (front or rear of the display). The details of the disconnect mode are covered in pages 27 & 28.
Determine where on the display you would like your wheels to appear (see multiple wheel illustrations on the next
page). These illustrations are the most common ones we see. There are endless configuration possibilities. If
you have any questions, please contact one of our TPMS specialists.
Your tire configurations are the only tire positions you need to modify to your baseline pressures (any positions
not used may be ignored). Using the following tire layout illustration write your baselines into the respective
positions for future reference.
To Next Page
Loading...
Need help?
General
