5. The reconnected positions will be in the “Auto-Search Mode” (if you scroll to them, you will see 0 PSI and
32°F). It may take up to 20 minutes to update all the reconnected tire information.
Auto-Search Mode:
This mode is really cool! It all happens with an “M” on the screen and can only be used after all transmitters have
been installed. When implemented, all current pressures will go to 0 PSI and the temperatures reset to 32°F.
The monitor will then automatically search for updated pressures and temperatures from all tires. All should be
recovered within 20 minutes.
When to use this mode:
After the rig has been in storage.
If you see NO-S on the monitor.
If you feel one or more positions are not updating.
In the morning before getting back on the road as the monitor may still show yesterday’s
information.
Quick-Tip: The auto-search function will not work if the monitor is close to requiring a re-charge.
To Next Page
Loading...
Need help?
General
