Mindray BeneView T8 Service Manual

5-24
4. Seperate industrial control board from mother board. Remove the heat conductive glue
on the mother board.
NOTE
z Take care of the heat-conductive glue which lies between the industrial control
board and the CIS mother board. Make sure the heat-conductive glue is coated
before reinstallation. Remember to install the separation pillar to the CIS mother
board whan reinstallation.
Heat-conductive glue
Industrial control board
Mother board

Mindray BeneView T8 Specifications

General

Brand	Mindray
Model	BeneView T8
Category	Monitor
Language	English