Mindray BeneView T8 Service Manual

5-27
4. Unscrew the two M3×12 screws and remove the cover of the power supply.
5. Unscrew the two M3×6 screws. pry out the board with a small flat-bladed screwdriver in
the gap between the power supply board and the housing. Then turn the board over and
unplug the cables from it.
Insulator
Equipotential Pilla
r

Mindray BeneView T8 Specifications

General

Brand	Mindray
Model	BeneView T8
Category	Monitor
Language	English