EasyManua.ls Logo

Mindray DC-88

Mindray DC-88
305 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C-12 Description of Self Test Items
Suggestion to failure test
Restart the device to perform the self test if the test result appears Error. It is necessary to restore
the device (OS+doppler) if Error re-appears.
If the test result is FAIL, replace the probe board first, and then the engine board.
C.1.30 Z0901 Control Panel USB Interconnection Test
Top test item
N/A
Test content
Test USB communication between control panel and main unit works well via reading internal
USB disk drive.
Analysis to test failure
The drive goes wrong if the test result appears Error.
The communication between control panel and main unit goes wrong if the test result is FAIL.
Suggestion to failure test
Restart the device to perform the self test if the test result appears Error. It is necessary to restore
the device (OS+doppler) if Error re-appears.
It is recommended to replace control panel if the test result is FAIL.
C.1.31 Z0902 Control Panel Key, Encoder, TGC, Trackball
Function Test
Top test item
USB communication test of control panel
Test content
Test whether the control panel keys, encoders, TGCs, trackball, backlight LEDs and indicating
LEDs on the keyboard work well, and read board ID, keyboard FPGA version and program
version.
Test description
The keyboard test interface is shown as follows:

Table of Contents

Other manuals for Mindray DC-88

Related product manuals