6-2 Software Installation &Maintenance
2. Click [Generate], and tick off “Display Password”. The password generated by the system will
be displayed in “Password List”, as shown below.
Take the Figure above as an example.
Note: the first time installment is the down payment.
a) The system creates each 4 installment password for 4 times installment.
b) First installment password:
After the user paying off the down payment, the installment dialog box appears after
turning on the device. Enter this password in “Period Password”, and click “Start” to log in
the system.
Note: after the user pays off the down payment and enters the first installment password,
the system starts to calculate next installment time.
c) Second installment password:
⚫ The user prepays the amount of this period installment.
Press [Setup]. Select [Maintenance] → [Setup] → [Prepay Installment], Choose [2] in
“Periods” list, and then enter the password. Then, click [OK] to log in the system. The
system reminds the user of the current available days.