II
Responsibility on the Manufacturer Party
All information contained in this manual is believed to be correct. Mindray DS shall not be liable
for errors contained herein nor for incidental or consequential damages in connection with the
furnishing or use of this manual.
Mindray will not be liable for the effects on safety, reliability and performance of this product if:
any installation operations, expansions, changes, modifications and repairs of this product are
not conducted by Mindray DS authorized personnel; and
the electrical installation of the relevant room does not comply with the applicable national
and local requirements; and
the product is not used in accordance with the instructions for use.
Upon request, Mindray DS may provide, with compensation, necessary circuit diagrams,
calibration illustration list and other information to help qualified technician to maintain and
repair some parts, which Mindray DS may define as user serviceable.
NOTE
z This equipment must be operated by skilled/trained medical professionals.
WARNING
For continued safe use of this equipment, it is necessary that the listed instructions
are followed. However, instructions listed in this manual in no way supersede
established medical practices concerning patient care
z Do not rely only on audible alarm system to monitor patient. When monitoring
adjusting the volume to very low or completely muting the sound may result in
the disaster to the patient. The most reliable way of monitoring the patient is at
the same time of using monitoring equipment correctly, manual monitoring
should be carried out.
z This multi-parameter patient monitor is intended for use only by medical
professionals in health care institutions.
z To avoid electrical shock, you shall not open any cover by yourself. Service must
be carried out by qualified personnel.
To Next Page
Loading...
Need help?
General
