6-1
6 Maintenance and Cleaning
6.1 Maintenance
6.1.1 Checking Before Using
Check the patient monitor for mechanical damages;
Check all exposed conductors, connectors and accessories;
Check all functions that are possibly enabled for the monitored patient, and ensure the
device is in good working status.
In case of any damage, stop using this patient monitor, and contact biomedical engineers of the
hospital or Mindray DS maintenance engineers.
6.1.2 Regular Checking
An all-around check, including the safety check, should be done by qualified personnel every
6-12 months or after maintenance each time.
All checks in which the patient monitor should be disassembled should be done by qualified
maintenance personnel. The safety and maintenance checks can be done by Mindray DS
engineers. The local office of Mindray DS at your region will be pleased to provide you with the
information about the maintenance contract.
To Next Page
Loading...
Need help?
General
